Filter
Top Products
19
ENG
● TROUBLESHOOTING
▪ Insert a USB drive containing the firmware upgrade into the USB port on
the right corner of the front
panel
.
▪ Please be careful to not disconnect the power or remove the USB drive while upgrades are being
applied. The main unit will turn off automatically after completing the firmware upgrade.
When software is upgraded, settings you have made will return to their default (factory) settings. We
recommend you write down your settings so that you can easily reset them after the upgrade.
▪ If the firnware fails to upgrade, we recommend formatting the USB data in FAT16 and trying again.
▪ For upgrading purposes, do not format the USB drive in NTFS format because it is not a supported
file system.
▪ Depending on the manufacturer, the USB may not be supported.
SOFTWARE UPGRADE
Samsung may offer upgrades for the Crystal Surround Air Track's
system firmware in the future.
If an upgrade is offered, you can upgrade the firmware by
connecting a USB drive with the firmware upgrade stored on it to
the USB port on your Air Track.
Note that if there are multiple upgrade files, you must load them
onto the USB drive singly and use them to upgrade the firmware
one at a time.
Please visit Samsung.com or contact the Samsung call center to
receive more information about downloading upgrades files.
5V 500mA