Filter
Top Products
16
This section explains two ways (digital and analog) of connecting the unit to the TV.
This unit is equipped with two optical digital jacks and one audio analog jack for connecting a TV.
Connect AUDIO IN on the main unit to the AUDIO OUT of
the TV or Source Device.
Be sure to match connector colors.
Connect the Digital Input on the main unit to the OPTICAL OUT of
the TV or Source Device
.
Do not connect the power cord of this product or your TV to the wall outlet until all
connections between components are
complete.
Before moving or installing this product, be sure to turn off the power and disconnect the
power cord.
If you select 'ANALOG' without connecting the Audio Cable, the set is turned off automatically
after 20 minutes.
If a TV or any device connected to Air Track with the optical cable is off and there is no
digital input, the Air Track is turned off after 20 minutes. (If there has been no input signal
for over 20 minutes from DIGITAL AUDIO IN 1 or 2, the Air Track will be turned off.)
When Air Track isn't linked with HT-WDC10 model in the W.iPod mode, Air Track will turn
off after 20 minutes.
▪
▪
▪
▪
▪
O
N
L
Y
F
O
R
U
P
D
A
TE
OPTICAL
DIGITAL
AUDIO IN
2
AUDIO IN
DIGITAL
AUDIO IN
1
(TV)
AUDIO IN
AUDIO
OUT
L
R
OPTICAL
OUT
Red
White
DIGITAL AUDIO IN 1, 2