11
EnG
● COnnECTIOnS
You can use the wall mount bracket to mount this unit on a wall.
Do not hang onto the installed unit and avoid any impact to the unit.
Secure the unit rmly to the wall so that it does not fall off. If the unit falls off, it may result in
an injury or damage to the product.
When the unit is installed on a wall, please make sure that a child does not pull any of
connecting cables, as it may cause it to fall.
For the optimal performance in a wall mount installation, keep the speaker system at least
2 inches (5 cm) distant from the TV.
▪
▪
▪
▪
Then, t the unit into the corresponding slots of the wall
mount bracket. For secure installation, make sure the
mounting studs slide rmly down into the bottom of the
slots.
Place the wall mount bracket on a wall surface
and then
secure it with two screws (not supplied).
This is the completion of the suggested wall mount
installation.
connections
Do not install on a place other than a vertical wall.
For the installation, avoid a location with high temperature or humidity, or wall that cannot sustain the
weight of the set.
Check the strength of the wall. If the strength of the wall is insufcient for the product installation, make
sure to reinforce the wall before the installation.
Check the material of the wall. If the wall is made of plaster board, marble, or iron board, purchase and
use the appropriate xing screws.
Cables connecting to external devices need to be connected to the set before installing.
Be sure to turn off and unplug the unit before installation. Otherwise, it may cause electric shock.
•
•
•
•
•
•
1 2
2 inches (5 cm) or more