Filter
Top Products
54
Setup
ZONE2 SETUP
You can use the remote control or the master volume of the main unit to adjust the volume of ZONE2.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches between SETUP
ENTER and SETUP OFF.
Press the ENTER button to select SETUP ENTER.
Press the ▲▼ buttons to select
ZONE2 SETUP, and then press the
ENTER or ► button.
Press the ▲▼ buttons to select VARIABLE or FIXED.
VARIABLE : You can control the ZONE2 volume directly in the main unit.
FIXED : Select this if you can control the ZONE2 volume directly in the
external amplifi er.
However, you can still use the MUTE button on the remote control regardless of the ZONE2 SETUP
settings.
If SB is set to ZONE2, “ZONE2 SETUP” will be changed to “VOL VARIABLE” accordingly.
12-V TRIGGER
Two different 12 Volt trigger outputs allow automatic activation of externally controlled devices.
Each port supports 12V/30mA trigger-activated functions (BD/DVD, SAT)
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches between SETUP
ENTER and SETUP OFF.
Press the ENTER button to select SETUP ENTER.
Press the ▲▼ buttons to select
12-V TRIGGER, and then press the
ENTER or ► button.
Press the ▲▼ buttons to select T1 or T2, and then press the ENTER or
► button.
Press the ▲▼ buttons to set the external device mode you want.
BD/DVD : When switching to BD/DVD mode, 12V signal will be output to
the TRIGGER OUT terminal.
SAT : When switching to SAT mode, 12V signal will be output to the
TRIGGER OUT terminal.
OFF : 12-V TRIGGER will be disabled.
1.
•
2.
3.
4.
•
•
M
1.
•
2.
3.
4.
5.
•
•
•
Æ
Æ
Æ
Æ
- HW-C900-XAA_0831.indd 54 - HW-C900-XAA_0831.indd 54 2010-08-31 6:22:302010-08-31 6:22:30