Filter
Top Products
ENG
MISCELLANEOUS
5756
Settings (Con’t)
• When playing a DVD disc encoded with two or more channels, multi-channel mode will be
selected automatically and the (Dolby Pro Logic II) button does not work.
This function works only in Dolby Pro Logic MUSIC mode.
1 Press the PL II MODE button to select <MUSIC> mode.
2
Press the PL II EFFECT button to select <P> (PANORAMA), then press the Cursor
, buttons to select the desired effect setting.
You can select either 0 or 1.
This mode extends the front stereo image to include the surround speakers for an exciting
"wraparound" effect with side wall imaging.
3 Press the PL II EFFECT button to select <C> (CENTER WIDTH), then
press the Cursor , button to select the desired effect setting.
You can select between 0 and 7.
This sets the width of the center image. The higher the setting, the less sound comes from the
center speaker.
4 Press the PL II EFFECT button to select <D> (DIMENSION), then press
the Cursor , button to select the desired setting
You can select between 0 and 6.
Incrementally adjusts the sound field (DSP) from the front or rear.
Dolby Pro Logic II Effect
Listening to Radio
1 Press the TUNER button to select the FM band.
2 Tune in to the desired station.
Automatic Tuning 1 : When the button is pressed, a preset broadcast station is select-
ed.
Automatic Tuning 2 : Press and hold the button to automatically search for active
broadcasting stations.
Manual Tuning : Briefly press the button to increase or decrease the frequency incrementally.
1 Press the FUNCTION button to select the FM band.
2 Select a broadcast station.
Automatic Tuning 1 : Press the STOP () button to select <PRESET> and then press the
button to select the preset station.
Automatic Tuning 2 : Press the STOP () button to select <MANUAL> and then press and hold
the button to automatically search the band.
Manual Tuning : Press the STOP () button to select <MANUAL> and then briefly press the
button to tune in to a lower or higher frequency.
Press the MO/ST button to listen in Mono/Stereo.
Each time the button is pressed, the sound switches between (STEREO) and (MONO).
In a poor reception area, select (MONO) for a clear, interference-free broadcast.
,
,
Remote Control
Main Unit
HT-X250-TX250(42~65P)-NO EUR 2007.3.19 5:57 PM Page 56