Filter
Top Products
18 - English
Settings
6.
Repeat Steps 4 and 5 until you have filled in all
parameters.
✎
You can get the network parameter values
from your Internet provider.
7.
When finished entering all the parameter
values, select Return (
'
), and then press the
v
button. The home cinema verifies the
network connection and then connects to the
network.
Wireless Network
You can set up a wireless network connection in
three ways:
-
Wireless Automatic
-
Wireless Manual
-
WPS(PBC)
Before you configure the wireless network
connection, disconnect any wireless network devices
currently connected to the product or, if applicable,
the product's current wired connection.
Ğ
Wireless - Automatic
Follow the Steps 1 to 3 in "Configuring Your
Network Connection". (See page 17)
1.
In the Network Settings screen, change
Network Type to Wireless. The product searches
for and then displays a list of the available
networks.
Network Settings
Select your network type.
Network Type Wireless
Wireless network
m Move " Select ' Return
You can connect your BD
Home Theater to the
internet. Please select which wireless
network to use.
WPS(PBC) Search
si-ap
MIC
KIMING_VTOWER
2.
Select the desired network, and then press the
v
button.
3.
On the Security screen, enter your network's
security code or pass phrase.
Enter numbers directly using the number
buttons on your remote control. Enter letters
by selecting a letter with ▲▼◀▶ buttons, and
then pressing
v
button.
4.
When finished, select Done, and then press the
v
button. The product verifies the network
connection and then connects to the network.
✎
You should be able to find the security code or
pass phrase on one of the set up screens you
used to set up your router or modem.
Ğ
Wireless - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
Follow the Steps 1 to 3 in "Configuring Your
Network Connection". (See page 17)
1.
In the Network Settings screen, change
Network Type to Wireless. The product searches
for and then displays a list of the available
networks.
2.
Scroll through the list, select the desired
network or Add Network, and then press the
v
button.
3.
If you selected a network in Step 2, go to Step 6.
If you selected Add Network, go to Step 4.
4.
Enter your wireless network or wireless router's
name.
●
Enter numbers directly using the number
buttons on your remote control.
●
Enter letters by selecting a letter with the
▲▼◀▶ buttons, and then pressing the
v
button.
●
To display capital letters (or redisplay lower
case letters if capital letters are displayed),
select , and then press the
v
button.
●
To display symbols and punctuation, select
123#&, and then press the
v
button. To
redisplay letters, select 123#&, and then
press the
v
button.
When finished, select Done, and then press the
v
button.
5.
On the Security method screen that appears,
use the ▲▼ buttons to select the network's
Security method, and then press the
v
button. On the next screen, enter your
network's security code or pass phrase.
●
Enter numbers directly using the number
buttons on your remote control.
●
Enter letters by selecting a letter with the
▲▼◀▶ buttons, and then pressing the v
button.