Filter
Top Products
|
40 English
Media Play
❑
SFE Mode
Symphony Hall in Boston (Hall 1)
Philharmonic
Hall in Bratislava (Hall 2)
Jazz Club in Seoul B
Church in Seoul
Amphitheater (Rock)
Off
• Symphony Hall in Boston (Hall 1) : Provides a
clear vocal as if listening in a concert hall.
• Philharmonic Hall in Bratislava (Hall 2) : Also
provides a clear vocal as if listening in a concert hall
but, less powerful than HALL1.
• Jazz Club in Seoul B : Recommended setting for
Jazz.
• Church in Seoul : Gives the feel of being in a grand
church.
• Amphitheater (Rock) : Recommended setting for
Rock.
• Off : Select for normal listening.
3D Sound
You can enjoy more natural and vivid surround sound
with enriched tones by adjusting the depth of sound
using the level options.
Off
High
Low
| NOTES |
\
3D Sound is not available in FM mode.
TV Sound
TV SOUND
If you have a TV that supports Anynet+ (HDMI-CEC),
the TV SOUND button lets you direct the TV's audio
to the Home Theater Speakers or the TV Speakers. To
use, follow these steps:
1. Connect an HDMI cable to the TV and home
theater. (See page 17.)
2. Set Anynet+ (HDMI-CEC) On in the home
theater and TV.
3. Press the TV SOUND button on the remote
control. TV SOUND ON flashes on the display
on the front panel, and then changes to D. IN.
• When TV SOUND is on, TV audio outputs
through the Home Theater speakers.
4. Press the TV SOUND button again to turn TV
SOUND off.
• When TV SOUND is off, TV audio outputs
through the speakers of the connected
Anynet+ TV.
❑
Use TV SOUND:
1) When you want to listen to the TV's audio
through the home theater speakers.
2) When you want to listen to the audio from a USB
device plugged into the TV through the home
theater speakers.
❑
TV SOUND ON/OFF support specification
Connected TV
Anynet+
(HDMI-CEC)
Setting
TV
Sound
ON
TV
Sound
OFF
Anynet+
(HDMI-CEC)
supported TV
ON O O
OFF O X
Anynet+
(HDMI-CEC) not
supported TV
No operation O X