Filter
Top Products
|
24 English
Settings
Anynet+
(HDMI-CEC)
Anynet+ is a convenient function
that offers linked operations with
other Samsung products that have
the Anynet+ feature and lets you
control those products with one
Samsung TV remote. To operate
this function, you must connect this
product to an Anynet+ Samsung TV
using an HDMI cable.
If you want to use an Anynet+
(HDMI-CEC) function, please follow
the instructions below.
1)
Connect the product to an
Anynet+ (HDMI-CEC)-compliant
Samsung TV using HDMI Cable.
2)
Set the Anynet+ (HDMI-CEC)
feature to On in both the TV and
the product.
3)
Search for and then select the
product in the TV's Anynet+
(HDMI-CEC) list. For more exact
instructions, see the Anynet+
section of the TV's user's
manual.
Support
Remote
Management
When activated, lets Samsung
Call Center agents diagnose and
fix problems with the product
remotely. Requires an active Internet
connection. Remote Management
service might not be available in
some countries.
Software
Update
For more information about the
Software Update function, see
"Upgrading Software" on page 27.
Use Mode
Lets you set the Use mode. If you
are using the home theater at home,
always select Home. Store is for
retail display settings only.
Contact
Samsung
Provides contact information for
assistance with your product.
Reset
Reverts all settings to their defaults
except for the network and Smart
Hub settings, and then starts the
Setup function. Requires that you
enter your security PIN. The default
security PIN is 0000
Networks and the Internet
When you connect this product to a network, you can
use network based applications and functions such as
Smart Hub and BD-LIVE, and upgrade the product's
software through the network connection. For more
information about accessing and using Internet services,
see the Network Services chapter of this manual on
pages 41~49. Instructions for configuring the network
connection start below.
Configuring Your Network Connection
If you didn't configure your network connection during the
initial settings procedure or you need to reset the network
connection, follow the directions below.
Before you begin, contact your Internet Service Provider
to find out if your IP address is static or dynamic. If it
is dynamic, and you have a wired or wireless network,
we recommend using the Automatic configuration
procedures described below.
If you are connecting to a wired network, connect the
product to your router using a LAN cable before you start
the configuration procedure.
To begin configuring your network connection, follow
these steps:
1. In the Home screen, select Settings, and then
press the
E
button.
2. Select Network, and then press the
E
button.
3. Select Network Settings, and then press the
E
button.
4. Go to the instructions for Wired networks starting
below or the instructions for Wireless networks
starting on page 25.
Wired Network
❑
Wired – Automatic
After following Steps 1 to 3 above:
1. In the Network Settings screen, change Network
type to Wired. Then, select Connect and press
the
E
button. The product detects the wired
connection, verifies the network connection and
then connects to the network.
2. When it is done, highlight OK, and then press
E
button.