Filter
Top Products
30 English
Setup
Before Starting (Initial settings)
Turn on your TV after connecting the product.
(When the product is connected to TV for the fi rst
time, product will turn on automatically and the
Initial Settings screen will be displayed.)
> Move
s
Select
Initial Settings I On-Screen Language
Select a language for the on-screen displays.
English
Français
Deutsch
Español
Italiano
Nederlands
Press the ▲▼ buttons to select the desired
language, then press the ENTER button.
Press the ENTER button to select Start button.
a Previous
"
Select
Initial settings
TV Aspect, Musical Room Calibration and Network will be set.
Each setting may be changed later under "Settings"
Start
Press the ▲▼ buttons to select desired TV
aspect ratio, then press the ENTER button.
(See page 32)
Musical Room Calibration screen will be displayed.
Plug the ASC microphone into the ASC IN jack
on the product. (See page 36)
Press the ENTER button to select Start button.
d
Skip
Initial settings I Musical Room Calibration
Preparing...
Setting the Musical Room Calibration function
takes about 3 minutes.
1.
2.
3.
4.
5.
6.
Press the ◄► buttons to select the desired
Network Settings : Wired, Wireless or PBC
(WPS), and then press the ENTER button.
If you do not know your Network Settings,
press the BLUE (D) button on your remote
instead to skip Network Settings here, fi nish
the Initial Settings, and go to the Home menu.
If you selected a Network Setting, go to pages
40~43 for more information about the Network
settings. When done, go to Step 8.
a Previous d Skip
<
Move
"
Select
Initial Settings I Network
Network Setting is needed to use various Internet services.
Choose the primary method for connecting to network.
Wired : Set the network by using Ethernet cable.
Please make sure that Ethernet cable is connected.
Wired
Wireless PBC (WPS)
Press the OK button.
The home menu will be displayed. (For more
information about home menu, please see
page 31)
Home Menu
internet radio
You Tube
No Disc a Change Device
d
View Devices
"
Enter
Please activate Internet@TV service
to enjoy a variety of Internet Services.
NOTE
When the product is connected to TV for the
fi rst time, product will turn on automatically.
Do not confuse because this is not
malfunction.
The home menu will not be displayed if you do
not confi gure the initial settings.
If you press the BLUE (D) button during the
Musical Room Calibration/Network setup, you
can access the home menu even if the
network setup is not completed yet.
When you return to home menu, the full
screen mode will be cancelled automatically.
7.
8.
•
✎
HT-C7530W_XAA_0817.indd 30HT-C7530W_XAA_0817.indd 30 2010-08-17 8:49:472010-08-17 8:49:47