Filter
Top Products
21
Press SETUP button.
•
“SETUP MODE” appears on the display and enters into Setup Mode.
Press FUNCTION button 1 time.
•
“SPK SETUP” appears in the display.
Press SURROUND button to select the speaker you
want.
•
Each time you press this button, F.SPK ➝ C.SPK ➝ S.SPK ➝ SW SPK
➝ CROVR will be selected in turn.
Press SELECT ( ) button to set the speaker
mode.
To Exit Setup Mode
•
Wait for about 5 seconds or press SETUP button.
“SETUP MODE OFF” appears on the display and exits Setup Mode.
•
LARGE : Select when you use large speaker. You can listen to full
range sound.
•
SMALL : Select this when you use small speaker.
Bass below 100Hz will not be output.
•
NONE : Select this when you use no speaker.
•
YES(Subwoofer) : Select this when you use Subwoofer
Speaker.
•
NO(Subwoofer) : Select when you do not use Subwoofer
Speaker.
•
CROVR: Select the crossover frequency for the best bass
response in your room.
•
F.SPK (Front) : LARGE, SMALL
•
C.SPK (Center) : LARGE, SMALL, NONE
•
S.SPK (Surround) : LARGE, SMALL, NONE
•
SW SPK (Subwoofer) : YES, NO
•
CROVR (Crossover Frequency) : 60, 80, 100, 120, 150, 180, 200Hz
Setting the Speaker
MAIN UNIT
1
2
4
3
,
OPERATION
AV-R610 XAC ENG-1 5/5/06 14:4212:0 Page 21