Samsung AV-R610 Stereo Receiver User Manual


 
13
SAT
(Settop Box)
VCR
TV
If using VCR, connect Analog Audio Out to VCR/SAT
Audio In on this unit. If using STB, connect Digital
Out to the SAT Optical connector on this unit.
The Analog Audio and Video In jacks of the main unit
are used for SAT and VCR. You cannot connect both
devices at the same time.
If there is a Digital Out for the satellite/cable STB, it
can be connected to the SAT Optical connector on
the rear panel to provide multi-channel surround. If
there is no Digital Out connector on the STB, connect
the Analog Audio Out connector to the VCR/SAT
Audio In on the unit.
If the external component has only one Audio Output
jack, connect it to either the right or left Audio Input
jack of the main unit.
Connect the audio cable's red plug to the red jack
and white cable to the white jack.
CONNECTIONS
AV-R610 XAC ENG-1 5/5/06 14:4212:0 Page 13