Samsung AH68-01008B Home Theater System User Manual


 
34
Creating Realistic Sound Fields
33
You can use the following surround to reproduce a realistic sound field.
Digital Multichannel Surround Dolby Digital and DTS Digital Surround
Dolby Surround
Dolby Digital and DTS Digital Surround
To enjoy surround effectively,all the speakers need to be connected and activated.
Dolby Digital
Used to reproduce multichannel sound tracks of the software encoded with Dolby Digital ( ).
Dolby Digital encoding method (so-called discrete 5.1 channel digital audio format)records and digitally compresses the
left front channel,right front channel,center channel,left rear channel,right rear channel,and LFE channel signals (total 6
channels,but LFE channel is counted as 0.1 channel.Therefore,called 5.1 channel).
Since each channel is completely independent from the other channel signals to avoid interference,you can obtain much
better sound quality with much stereo and surround effects.
In addition,Dolby Digital enables stereo rear sounds,and sets the cutoff frequency of the rear treble at 20 kHz,compared
to 7 kHz for Dolby Pro Logic.These facts enhance the sound movement and being-there feelings much more than Dolby
Pro Logic.
When the system detects Dolby Digital signals,the DOLBY DIGITAL indicator lights up on the display.
DTS Digital Surround
Used to reproduce multichannel sound tracks of the software encoded with DTS Digital Surround ( ).
DTS Digital Surround is another discrete 5.1 channel digital audio format available on CD,LD,and DVD software.
Compared to Dolby Digital,audio compression rate is relatively low.
This fact allows DTS Digital Surround format to add breadth and depth to the reproduced sounds.As a result,DTS Digital
Surround features natural,solid and clear sound.
When the system detects DTS Digital Surround signals,the DTS indicator lights up on the display.
Dolby Surround
Used to reproduce sound tracks of the VCR tapes encoded with Dolby Surround ( ).
This is only used for the sound sources coming through the AUX IN jacks.
Dolby Pro Logic and Dolby 3 Stereo
Dolby Surround encoding format records the left front channel, right front channel,center channel,and rear channel
signals (total 4 channels)into 2 channels.
The Dolby Pro Logic decoder built in this system decodes these 2 channel signals into original 4 channel signals
matrix-based multichannel reproduction,and allows you to enjoy a realistic stereo sound in your listening room.
When one of Dolby Surround is selected,the PRO LOGIC indicator lights up on the display.
Manufactured under license from Dolby Laboratories. “Dolby,”
“Pro Logic,” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished Works. ©1992–1997
Dolby Laboratories, Inc. All rights reserved.
Manufactured under license from Digital Theater Systems, Inc.
US Pat. No. 5,451,942 and other world-wide patents issued
and pending. “DTS” and “DTS Digital Surround” are
trademarks of Digital Theater Systems, Inc. ©1996 Digital
Theater Systems, Inc. All rights reserved.
DSP Function
To Select a DSP
The DSP mode toggles in the following
order each time the DSP button is pressed:
HALL THEATER PAVILION
DANCE CLUB LIVE CLUB.
DSP Mode
Press the DSP Mode button.
What is a DSP?
DSP synthetically recreates the sound
field to achieve a more realistic,
powerful sound.
To increase Effect level
The effect level can be set in steps from 1 to 4
EFFECT1
EFFECT2 EFFECT3
OFF(DEFAULT).
Each time the button is pressed the selection
moves to the next effect.
The higher the number, the stronger the DSP
surround effect will be.
Effect
Press the Effect button.
What is a Effect?
This sets the strength of the DSP
mode.
DSP mode cannot be selected when a microphone is connected.
When playing a DVD encoded in two or more channels, DSP mode cannot be selected.