Filter
Top Products
GB
19
You can store up to:
15 FM stations
(option)
15 AM stations
15 FM stations
8 MW stations
(option)
7 LW stations
15 FM stations
5 MW stations
(option)
5 SW1 stations
5 SW2 stations
Switch the system on by pressing On/Standby.
Select the TUNER function by pressing TUNER .
Select the required frequency band by pressing TUNER (Band) again
on the front panel or TUNER (Band) on the remote control.
Result
: The appropriate indication is displayed:
FM Frequency Modulation
AM(MW) Medium Wave
LW(OPTION) Long Wave
SW1, SW2(OPTION) Short Wave
To search for a Press Tuning Mode
station...
Manually One or more times until MANUAL is displayed.
Preset One or more times until PRESET is displayed.
Select the station to be stored by:
Turning the Multi Jog knob to the right or to the left to increase or
decrease the frequency respectively
or
Pressing Tuning or on the remote control
To scroll through the frequencies faster when searching manually,
hold down the Tuning Down or Up buttons.
The automatic search procedure may stop on a frequency that does
not correspond to a radio station. If this happens, use the manual
search mode.
Adjust the volume by:
Turning the Volume knob on the front panel
or
Pressing the VOL. + or – buttons on the remote control
Select the FM stereo or mono mode by pressing Mono/ST. on the
remote control.
If you do not want to store the radio station found, revert to Step 4 and
search for another station.
Otherwise:
a Press Program.
Result:
The PRGM is displayed for a few seconds.
b Press Tuning Down and Up or turn Multi Jog to assign a
programme number between 1 and 15.
c Press Program to store the radio station.
Result:
PRGM is no longer displayed and the station is stored.
To store any other radio frequencies required, repeat Steps 3 to 8.
The PROGRAM function can be used to assign a new station to an
existing programme number
You can listen to a stored radio station as follows:
Switch the system on by pressing On/Standby.
Select the TUNER function by pressing TUNER .
Select the required frequency band by pressing TUNER (Band) on the
remote control or TUNER (Band) again on the front panel.
Press
/
button on the front panel of the unit, or the Tuning
Mode button on the remote control until “PRESET” is displayed.
Turning Multi-jog on the front panel left or right until the desired
station is found or press
/
to select the desired station.
or
Select the desired station by pressing the station number stored, using
the Tuning or button on the remote control.
Result:
The desired station is now received.
You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
Testing the positions of the FM and AM(MW) aerials before fixing them per-
manently
If reception from a specific FM radio station is poor, press Mono/ST. on
the remote control to switch from stereo mode to mono.
The quality of the sound will be improved.
Searching for and Storing the Radio
Stations
1
2
3
4
5
6
7
2,3
1
6
5,
9
8
8
5, 8
5, 8
8
Volume
Tuning
Mode
Volume
PREV NEXT
PREV
NEXT
55
Tuning
Mode
4
Selecting a Stored Station
On/Standby
123
456
789
ReturnCD Repeat
SlowSound
Key Control
Zoom
+10/0 Mono/ST.
Mute Disc Skip
#
b
Disc
View
Time
Search
Band
1
2,3
Volume
Tuning
Mode
Volume
PREV NEXT
VCD / CD
PREV
NEXT
55
Tuning
Mode
4
Improving Radio Reception
123
456
789
AI Sleep Deck 1/2
ReturnCD Repeat
SlowSound
Key Control
Zoom
+10/0 Mono/ST.
#
b
Timer
On/Off
Counter
Reset
Disc
View
Time
Search
Band
1
2
3
4
5
MAX-VL45GB-1~18 11/12/02 1:43 PM Page 19