Samsung AH68-00935B Stereo System User Manual


 
GB
15
You can check or change your selection of tracks at any time.
Press once if you have started listening to the selection.
Press Program.
Result:
The following indications are displayed:
(C = Check, 01=Program No, DI = Disc No, = Track No on the disc)
If you have already programmed 30 tracks, C is displayed
instead of P when you press Program.
Press Program again.
Result:
The first track selected is displayed, together with the letter C (Change).
Press Program one or more times until the track to be changed is displayed.
If necessary, press the corresponding Disc (1, 2, 3) button to change discs.
Press and or turn Multi Jog to select a different track.
Press Program to confirm your change.
Press VCD/CD ( ) to start listening to the selection.
Result:
The first track selected is played.
When selecting the tracks of numbers larger than 3 digit figures (figures
from the number 100), please use the Digit buttons.
Checking or Changing Programmed
Tracks
1
2
3
4
5
6
7
8
123
456
789
TAPE
AI Sleep Deck 1/2
ReturnCD Repeat
SlowSound
Key Control
Zoom
+10/0 Mono/ST.
Mute Disc Skip
Volume
Tuning
Mode
Volume
PREV NEXT
VCD / CD
#
b
Timer
On/Off
Counter
Reset
Disc
View
Time
Search
Band
PREV
NEXT
1
8
6
6
You can decide:
The order in which you listen to the tracks on the discs loaded
Which tracks you do not wish to listen to
A maximum of up to 30 order of tracks desired to listen may be programmed.
Before selecting the track, the VCD player should be stopped.
This function may be used simultaneously with the CD Repeat function.
If the CD function is selected, stop the player by pressing .
Load the selected CDs.
Press Program.
Result: The following indications are displayed:
(01 = Programme No, DI = Disc No, = Track No on the disc)
If necessary, select the disc containing the required track by pressing
the corresponding Disc (1, 2, 3) button.
Select the required track by turning the Multi Jog knob:
To the left to move back through the tracks
To the right to move forward through the tracks
Press Program to confirm your selection.
Result:
The selection is stored and is displayed.
To select other tracks, repeat Steps 4 to 6.
Press VCD/CD ( ) to listen to the track selection in the order pro-
grammed.
To... Turn the Multi Jog knob...
Listen to the current track again One notch to the left
Listen to the previous track Two notches to the left
Listen to the next track One notch to the right
Skip forwards or backwards one The appropriate number of
or more tracks notches to the right or to the left
To cancel the selection, press .
Once if the compact disc player is stopped
Result:
PRGM is no longer displayed.
If you open the compartment, the selection is cancelled.
If you select the number of a disc which is not loaded or a track
which does not exist on the CD, the selection skips to the next
programmed track.
You can also use the / buttons to select the required
tracks in step 5, 9.
1
2
3
4
5
6
Programming the Order of Playback
4
8
5,9
1,10
3,6
5,9
5,9
8
9
10
7
5
8
6
1
2,3,4,7
6
6
MAX-VL45GB-1~18 11/12/02 1:43 PM Page 15