15
ENGLISHFRANÇAISDEUTSCHEESPAÑOLITALIANO
Audio Setup
From the main performance page, press the MENU/SELECT Button to enter the Main Menu.
With AUDIO SETUP highlighted, press the MENU/SELECT button to enter the AUDIO SETUP sub-menu.
Setting the Audio Level
Rotate the cursor to select the AUDIO LEVEL parameter.
Press the MENU/SELECT button to adjust the setting.
Rotate the MENU/SELECT knob to adjust the output level setting.
Press the MENU/SELECT button to confirm and store the setting or press the POWER button to cancel the
selection and move back to the AUDIO LEVEL sub-menu.
OFF
01
Audio Setup
Audio Level
HPF
Back
OFF
12
Audio Setup
Audio Level
HPF
Back
OFF
01
Audio Setup
Audio Level
HPF
Back
ON
12
Audio Setup
Audio Level
HPF
Back
Enabling the High Pass Filter
Rotate the cursor to select the HPF parameter.
Press the MENU/SELECT button to adjust the setting.
Rotate the MENU/SELECT knob to turn the HPF On or OFF.
Press the MENU/SELECT button to confirm and store the setting or press the POWER button to cancel the
selection and move back to the AUDIO LEVEL sub-menu.
Advanced Setup
From the main performance page, press the MENU/SELECT Button to enter the Main Menu. With ADVANCED
SETUP highlighted, press the MENU/SELECT button to enter the ADVANCED SETUP sub-menu.
Adjust the Squelch Threshold
Rotate the cursor to select the SQUELCH parameter. Press the MENU/SELECT
button to adjust the setting. Rotate the MENU/SELECT knob to adjust the
threshold level. Press the MENU/SELECT button to confirm and store the setting.
Press the POWER button to cancel the selection and move back to the ADVANCED
LEVEL sub-menu.
The Squelch threshold setting is
helpful in increasing the audio
reception between the receiver
and transmitter when there is
RF interference. As the squelch
threshold is increased, the
overall range is reduced. Always
start with the squelch set to the
minimum setting.
01
LOW
Advanced Setup
Squelch
Tone Key
Contrast
Lock
Back
ON
ON
01
MID
Advanced Setup
Squelch
Tone Key
Contrast
Lock
Back
ON
ON