Filter
Top Products
28
MFX 04: PHASER1 MFX 05: PHASER2
Parameter
Value Description
Resonance
0–127 Amount of feedback
Sync OFF, ON
When this is set to ON, the effect is
synchronized with the tempo.
See
“About Note”
(p. 36).
Rate
0.05–
10.00 Hz,
note
Frequency of modulation
Depth 0–127 Depth of modulation
Low Gain -15–+15dB Boost or cut in the low end
High Gain -15–+15dB Boost or cut in the high end
Level 0–127 Output Level
Parameter
Value Description
Mode
4-STAGE,
8-STAGE,
12-STAGE
Number of stages in the phaser
Manual 0–127
Adjusts the basic frequency from which
the sound will be modulated.
Resonance 0.127 Amount of feedback
Feedback -98–+98 %
Adjusts the proportion of the phaser
sound that is fed back into the effect.
Negative (-) settings will invert the phase.
Mix 0–127 Level of the phase-shifted sound
Sync OFF, ON
When this is set to ON, the effect is
synchronized with the tempo.
See
“About Note”
(p. 36).
Rate
0.05–
10.00 Hz,
note
Frequency of modulation
Depth 0–127 Depth of modulation
Polarity
INVERSE,
SYNCHRO
Selects whether the left and right phase of
the modulation will be the same or the
opposite.
INVERSE
: The left and right phase will
be opposite. When using a mono
source, this spreads the sound.
SYNCHRO
: The left and right phase will
be the same. Select this when inputting
a stereo source.
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range
Level 0–127 Output Level
ARX-02_e.book 28 ページ ２００８年３月７日 金曜日 午後７時２２分