Filter
Top Products
21
Selecting a patch
Move the cursor to PATCH NAME and change the value to select a
patch (001–050).
Saving a patch (on the Fantom-G)
A patch you’ve created is temporary; it will be lost if you select a
different patch. If you want to save the patch you’ve edited, proceed
as follows.
1.
P
ress the [WRITE] button on the Fantom-G.
2.
Assign a name to the patch.
For details on how to assign a name, refer to the Fantom-G
owner’s manual.
3.
When you’ve finished assigning the name, press the [F8 (OK)]
button
.
4.
Select a patch number, and press the [F8 (WRITE)]
button
.
5.
When the confirmation screen appears, press the [F7 (OK)]
button
to save the patch.
ARX-02_e.book 21 ページ ２００８年３月７日 金曜日 午後７時２２分