Filter
Top Products
20
Setting of Patch
The basic screen shows the PATCH NAME, as well as the main
parameters of the patch.
* For details on the parameters in MFX section, refer to
“Selecting
an Effect (MFX Screen)”
(p. 26)
* For details on the parameters in Pre Amp section, refer to
“Select-
ing the Type of Pre Amp (Pre Amp Screen)”
(p. 32)
The Basic Screen
About this manual
• The screen images used in this manual are taken from a Fantom-G with the ARX-02 installed. The various procedures described also
assume that you are using the ARX-02 installed in a Fantom-G.
• For details on how to move the cursor or edit a value, refer to the owner’s manual for the device in which you’ve actually installed the
ARX-02.
Parameter
Description Page
Condition
Specifies the condition of the electric
piano.
p. 22
Pickup Level Volume of the electric piano tone. p. 22
Amp Level Output Level of the “Pre Amp.” p. 32
MFX Switch Turns MFX on/off. p. 26
Pre Amp Switch Turns Pre Amp on/off. p. 32
ARX-02_e.book 20 ページ ２００８年３月７日 金曜日 午後７時２２分