Filter
Top Products
4
DESIGN FEATURES
1. LED Power Indicator – The LED illuminates when the unit is turned on.
2. REM Terminal – This spade terminal is used to remotely turn-on and turn-off the amplifier when
+12V DC is applied.
3. Power Terminals – The power and ground connectors on the amplifier are gold-plated and will
accommodate up to 8 AWG (10 AWG Model 200S) wire maximizing the input current
capability of the amplifier.
4. Cast Aluminum Heatsink – The cast aluminum heatsink of the Punch amplifier dissipates heat
generated by the amplifier's circuitry. The inherent advantage of casting provides a 30%
improvement of cooling over conventional extrusion heatsink designs.
5. Punch Bass (Models 150S & 200S) – Helps correct for acoustical deficiencies in the listening
environment by helping produce full range sound without adding excessive boost.. The Punch
Bass control is a narrow band adjustment at 45Hz switchable from 0dB to +6dB to +12dB.
5. Punch Bass (All Other Models) – Helps correct for acoustical deficiencies in the listening
environment by helping produce full range sound without adding excessive boost.. The Punch
Bass control is a narrow band adjustment at 45Hz variable from 0dB to + 18dB. Connection is
made with a cable using RJ-45 and can be installed under the dash for remote control access.
758 9
1010
4123
6
4123
Connections -
Models 150S &
200S
Power
Connections -
Models 300S,
400S & 500S
412 3
665 7789
1010
Connections -
Models 300S,
400S, 500S &
700S
Power
Connections -
Model 700S