Roberts Radio RD-46 Radio User Manual


 
13
Manual tuning - FM
1. Press the On/Off button to switch on your radio.
2. Press the
Band button to select the FM band. Fully extend the Tel-
escopic aerial.
3. Press and release the
Select button until the display shows "Manual
tune <>".
4. Press either the
Tuning Up or Down buttons to tune to a station.
Thefrequencywillchangeinstepsof50kHz.
5. When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
6. Set the
Volume and tone controls totherequiredsetting.
7. To switch off your radio press the
On/Off button.
2
1
4
3
4