Roberts Radio RD-46 Radio User Manual


  Open as PDF
of 20
 
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
12
Operating your radio - FM
1. Carefully extend the telescopic aerial.
2. Press the
On/Off button to switch on your radio. The display will show
"Roberts" for a few seconds.
3. Press the
Band button to select the FM band.
4. Press and release the
Select button until the display shows "Auto
tune <>".
5. Press the
Tuning Up button your radio will scan in an upwards
direction(lowfrequencytohighfrequency)andstopautomatically
whenitndsastationofsufcientstrength.
6. After a few seconds the display will update and show station name.
7. Press the
Tuning Down button to scan the FM band in a downwards
direction(highfrequencytolowfrequency).
8. When the waveband end is reached your radio will recommence tuning
from the opposite waveband end.
9. Adjust the
Volume and tone controltotherequiredsetting.
10. To switch off your radio press the
On/Off button.
3
2
4
7 5
 previous next