Roberts Radio RD-46 Radio User Manual


  Open as PDF
of 20
 
9
1
Finding new stations - DAB
Astimepassesnewstationsmaybecomeavailable.Tondnewstations
proceedasfollows:-
1. Press and release the
Auto Tune button, the display will show
"Autotune Quickscan".Yourradiowill performa scanof theUK
DABfrequencies.Asnewstationsarefoundthestationcounteron
theright-handsideofthedisplaywillincreaseandstationswillbe
added to the list.
2. TocarryoutafullscanoftheentireDABBandIIIfrequenciespress
and hold down the Auto Tune button for more than 2 seconds and
then release. The display will show "Auto tune Full scan". As new
stationsarefoundthestationcounterontheright-handsideofthe
display will increase and stations will be added to the list.
Signal strength display - DAB
1. Press and release the Select button until the display will show signal
strength.
2. Position your radio and carefully angle the telescopic aerial for best
reception using the signal strength display as a guide. Move your
radio around and position so as to give maximum number of black
rectangles on signalstrength display.The clear unlledrectangle
indicatesminimumsignallevelrequiredforsatisfactoryreception.
3. Press the
Select button to exit the signal strength display.
2
1,3
 previous next