Filter
Top Products
IB-HT500-WM-E-080202
9
DVD Home Theater System + TV with a Video Input Jack
1. Connect the 5 satellite speakers and subwoofer as shown on Page 5 (or the QUICK SETUP DIAGRAM packed
with the set).
2. Insert the video cable (yellow) into the VIDEO OUT jack on the back of your DVD HOME THEATER SYSTEM, and
into the VIDEO IN jack on your TV. This connection will allow you to enjoy video images of normal quality.
3. Insert the AC power cord into an AC outlet.
4. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Later you should
press the POWER button on the REMOTE to turn the set on (or off).
5. Go to Page 22 for playing DVDs (discs).
NOTE: Your cable or antenna connection to the television will not be affected by this connection. Connect your
antenna cable to your television as you normally would. You may need to consult your television manual
for details, but no changes will be made to your current antenna connections.
TV CONNECTION - Normal
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 5
(OR THE QUICK SETUP DIAGRAM).
YELLOW VIDEO CABLE
(INCLUDED)
IF YOUR TV HAS AN S-VIDEO JACK, SEE PAGE 10
FOR INSTRUCTIONS ON CONNECTING THIS
NOTE: Your TV set must have a VIDEO INPUT jack for you to be able to connect and enjoy this DVD HOME THEATER SYSTEM.
NOTE: On some TVs, this jack
is in the front.