Filter
Top Products
OPERATION
1)
Turn
on
the
audio
source
(TV
or
audio
component)
to
which
the
transmitter
is
connected.·
2)
Switch the
ON
/OFF
switch
on
the
headphone
to
ON.
3) Place the
headphones
on
your
head
and
adjust
the
volume
control to the
desired
listening level. The adjustable
head-
band
lets
you
adjust
the
length
of the
headphones
for a
comfortable fit.
4)
Tune the frequency
adjustment
control, located
on
the back of
the
transmitter, to a mid-level setting.
Just
rotate the
thumb-
wheel
knob
up
or
down
and
leave it set
approximately
in the
middle
of
the range.
5)
Adjust
the
tuning
dial of the
headphone
to the frequency of
the
transmitter
for
best
reception.
NOTE
You
should
now
be
able to walk freely from room to room without disruption.
If
disruption should occur (signal breaks up), adjust the headphones tuning control
to maximize stereo reception.
If
you
hear interference from other components, re-adjust the twung control.
Move the control
on
the transn1itter
to
a different setting, then adjust the control
on the headphones
to
matdl
the
new
setting.
You
may have
to
try a few loca-
tions to find one with no interference.
When
transn1itting/receiving over long distances, the signal from the system
will
become weaker
and
the stereo indicator light will go dinl.
For protection of the transnutter
and
to save power, the transnutter will cut off
automatically in about one minute
when
the input signal from the audio source
is
too weak for operation.
If
the signal
is
restored, the transnutter will work
again autoinatically. 7