Filter
Top Products
INSTALLATION OF
TRANSMlnER
1)
Connect
the
supplied
AC
power
adapter
to
an
electrical
wall outlet.
2)
Plug
the AC
power
Adapter
into the DC jack located
on
the
rear
of the transmitter.
AC/DC
Charge-
Adapter
Green
Output
LED
Jack
Audio
Cord
3)
Locate the
audio
cord connected at the back of the transmit-
ter.
The
3.5
mm
plug
provided
can be
used
to connect the
transmitter
to the
headphone
jack of
any
audio
source.
4
If
your
equipment
has
a
1/4"
size jack,
use
the
adapter
plug
included
with
the
headphone.
For connection to RCA
type
radio
jacks located
on
the back of
a
TV,
VCR
or
A/V
receiver,
use
the "Y"
adapter
that
is
included. Just insert
the
mini
plug
on
the
audio
cord into
the
jack
on
the
adapter
to
convert
the connector for this applica-
tion.
Then
insert
the red
and
white
RCA
plug
ends
into the
equipment
jacks
marked
"Audio
Out"
to
make
the
audio
source connection (see diagram).