Filter
Top Products
I
CHARGING
THE
BAnERIES
1)
Switch the
ON
/OFF
switch
on
the
headphone
receiver to OFF.
2)
Plug
the charge
output
plug, located
on
the
back
of
the
transmitter,
into
the
charge
input
jack of the
headphone
receiver to charge the batteries.
3)
The
charging
process
starts
automatically
and
the RED LED
lights
up
indicating
the
unit
is
charging.
4)
After the quick charge
is
completed, the quick charge indicator
will
be
OFF; however, the trickle charge will continue.
Caution: Do not use other kinds of batteries
to
replace the Ni-Cd quick
charge
(AA)
battery. When you are not using the head-
phone, please switch
it
off
as the batteries can be damaged.
Headphone
Base
a Red LED
The Ni-Cd (nickel
cadmium)
batteries
must
be fully charged
prior
to operation.
An
initial charge of
24
hours
is required to
ensure
the
extended
life of the Ni-Cd batteries.
Be
sure the
headset
is in
the
OFF position
during
charging status.
6