Filter
Top Products
VCR MAIN MENU
1 TIMER RECORDINGS
26
Recording a Program
Timer Recording From the VCR’s Line Input
The line input refers to the signal coming from the AUDIO1 and
VIDEO1 IN jacks of the VCR. Recording from the line input is
convenient if you have a satellite receiver or similar component
attached to these jacks.
To timer record from the component connected to the VCRÕs line
input, press INPUT or “0,0” on the remote to enter VIDEO in the
channel number position.
Checking or Clearing Timer Recordings
1. Press MENU on the remote to display the VCR MAIN MENU.
2. Press 1 to display the TIMER RECORDINGS menu.
3. Press 2 to display the programÕs menu.
4. Press MENU for next program or CLEAR to erase the
program.
Recording While You’re Away (Timer Recording)
PROGRAM 1 (ONE TIME)
CHANNEL VIDEO
START TIME --:-- --
END TIME --:-- --
START DATE --/--/--
TAPE SPEED SLP
PRESS CLEAR TO CORRECT
PRESS MENU TO EXIT
TIMER RECORDINGS
1 CREATE A NEW PROGRAM
2 REVIEW EXISTING PROGS.
PROGRAM 1 (ONE TIME)
CHANNEL 08
START TIME 02:10 PM
END TIME 03:35 PM
START DATE 08/04/96 SUN
TAPE SPEED SLP
PRESS CLEAR TO ERASE
PRESS MENU FOR NEXT PROG