Filter
Top Products
To play a tape
1. Turn on the TV and tune it to channel 3, 4, or the TVÕs video input to see the
picture from the VCR.
2. Insert a tape in the VCR.
The VCR automatically turns on. The cassette-in indicator (
) lights, and the
VCR indicators light (if the AUTO TV/VCR feature is turned ON). The tape
automatically begins playback if the safety tab on the cassette has been removed
and the AUTO PLAY feature is turned on.
3. Press PLAY•PAUSE on the VCR or PLAY on the remote if necessary.
The playback indicator (
) appears in the VCRÕs display panel.
4. Press TRACKING up or down on the remote or the VCR to remove any streaks
from the picture if necessary. Details are on page 19.
5. Press STOP•EJECT on the VCR or STOP on the remote.
6. Press REW on the VCR or the remote.
End of Tape
The VCR automatically rewinds the tape if it reaches the end of the tape during
playback.
Power Off
If you press POWER while a tape is rewinding, the VCR turns off automatically
when it is completely rewound. REWIND POWER OFF is displayed on the TV
screen.
7. Press STOP•EJECT on the VCR to eject the tape once it is completely rewound.
14
Playing a Tape
Playback
CHANNEL
POWER
TV•VCR
TRACKING
RECORD
REW
FWD
STOP•EJECT
PLAY•PAUSE
VCR
H i-F i
Safety Tab