Filter
Top Products
19
Index Search
The VCR has a ÒVHS Index Search SystemÓ that automatically records an index mark on the tape
every time you begin recording a program. During playback you can locate the program you want
to play by the number of index marks.
The VCR will automatically locate the index number you select. The VCR will search forward or
reverse from the location you are on the tape.
Using the Playback Features
Playing a Tape
INDEX SEARCH
Enter Index Number
01
Press FWD or REW
Press SEARCH to exit
0:30:00
3. Press two number buttons to enter the number of index
marks you want the VCR to search.
Press CLEAR to correct an entry.
4. Press FF on remote or FWD on the VCR to search forward
or press REW to search in reverse.
The time counter is displayed in the upper right corner of
the TV screen during search.
5. Press STOP to stop index searching.
Some index marks may be missed by the VCR.
¥ A mark too close to your location on the tape.
¥ The mark at the beginning of a recorded
segment of five minutes or less.
¥ The first index mark on the tape when you
start at the beginning of the tape.
1. Insert the prerecorded tape and press STOP.
2. Press SEARCH on the remote to display the INDEX
SEARCH menu on the TV screen.
VCR
TRACKING
SLOW
POWER
REW
PLAY
FF
RECORD
STOP
PAUSE
INPUT
PREV CH
F.ADV
CLEAR
MENU
1
2
3
4
5 6
7
8
9
0
DISPLAY
SPEED
TV•VCR
TV
MUTE
VOLUME
SEARCH
PROG
CHANNEL
Commercial Scan (SEARCH Button)
This is useful for scanning commercials or short program segments.
1. Press SEARCH once during playback to advance the tape
approximately 60 seconds.
2. Press SEARCH twice during playback to advance the tape
approximately 120 seconds.