Filter
Top Products
Getting Started
Connecting to Audio-Visual Components
4
TV
TO VIDEO IN (VCR)
TO AUDIO IN (VCR)
SAT
TO VIDEO OUT (VCR)
TO AUDIO OUT (VCR)
TO AUDIO OUT (SAT)
VCR
DIGITAL OUTPUT
Connect components
capable of recording
digital signals (e.g. MD,
CD recorder player)
equipped with a optical
input.
S-VIDEO
S-video provides a better connection for the video portion of the signal
than composite video (yellow color terminal). When connecting S-video
cable, a Composite video cable (yellow RCA connector) must also be
used. S-video will have video output for DVD playback only.
ANALOG INPUT
Alternatively, if you have no VCR or SAT, you can connect any other
compatible components like TAPE player, TV to your DVD receiver via
the VCR/SAT input.
- VCR audio/video out will have output signal in SAT, DVD/CD and
TUNER modes. When VCR (source) is selected, there will be no
audio/video signal from VCR audio/video out.
VIDEO IN (TV)
S-VIDEO IN (TV)
COMPONENT IN (TV)
Component video output
Component video terminal provides the best connection for video. By separating the color information (Pb/Pr) and the
luminance signal (Y), the image is improved comparing with S-video or composite video connection (result may vary on
different TV / monitor). If your TV is equipped with these terminals (e.g. Y/Pb/Pr, Y/Cb/Cr, Y/B-Y/R-Y), use an appropriate
video cable (75 Ohm) and connect to the system. Make sure to match the terminal color.
Progressive Scan
- It is necessary to use component video connection to enjoy progressive scan.
- Connect to a TV that has 480P input terminal or compatible with copy guard system, else the image will not be displayed
properly.
- If progressive scan is ON, there will be no video signal output at composite video (VCR OUT), s-video and composite video
monitor output. (Please refer to page 20 for details of activating progressive scan function)
COMPONENT
DVD ONLY
Cr
Cb
Y
OUT
OUT
L
R
IN
VCR
SAT
OUT
IN
IN
VIDEO
AUDIO
S-VIDEO
DVD ONLY
OUT
MONITOR
OUT
DIGITAL
OPTICAL OUT
IN
VIDEO OUT (SAT)
(If available)
(if available)
RTD250-EN receiver 10/30/03 10:08 AM Page 8