Filter
Top Products
DVD Player
EN
25
Set up menu
General use
1. Press MENU in STOP AND RESUME mode to display the
set up menu on screen. The menu shows the current set-
tings.
2. Use the arrow buttons to highlight an option and press
OK to open the selected menu.
3. Press the LEFT arrow to go back to the previous menu
or press GO BACK to exit the setup menu completely.
Audio language
This step will define the default audio language. Choosing
an audio language from the on-screen banner display will
only overwrite this setting temporarily.
1. Open the audio language menu.
2. Use the UP and DOWN arrows to select a language and
then press OK.
For languages other than the available options:
3. Press DOWN to select “Other” and then press OK.
4. Use 0-9 to enter the code for the chosen language, then
select OK to return to the main menu..
NOTE
Pressing MENU during disc playback will display the
disc menu, not the player setup menu.
NOTE
If the selected language is not available on a disc,
that disc's own default language will be used
instead.
RTD250-EN DVD 10/30/03 10:17 AM Page 7