Filter
Top Products
Radio
38
Operating the Radio
The receiver has a built-in tuner that allows for AM/FM
radio function.
Manual tuning
1. Connect the FM and AM antenna accordingly (see
"Connecting the Antenna" on page 5 section for details)
2. Press ON/STANDBY on the main unit or ON/OFF button
on the remote.
3. Press SOURCE on the front of the unit until the tuner
mode is selected. You may also directly press TUNER on the
remote control.
4. o select a band, you may press TUNER again on the
remote control. You may also press the BAND/AAP button
on the main unit.
When an FM station broadcasts Stereo sound, ST is dis-
played.
5. Tune the a station by pressing TUNER + or TUNER - on
the remote control repeatedly until the desired station is
found.
Alternatively, you can press and hold the same buttons for
about one second to activate the automatic SEARCH func-
tion. In this mode the receiver will automatically tune fre-
quencies until it finds a station.
6. Repeat steps 5 to tune to another radio station.
Select a sound effect if needed by pressing DSP.
ON/STANDBY
BAND/AAP REPEAT RA
N
Digital
Sound
Processor
DIGITAL
PRO.LOGIC
INTRORANDOM
LCR
LS
LFE
RS
DVD
VCD
CD
MP3
NOTE
1. If there is interference, modify the location
of the antenna until the optimal sound is heard.
TV and other electronic devices could be the
cause of interferences so try to position the
antenna away from them.
2. Weak signal can affect the "auto Search
function". Adjust the antenna for a better
reception and for a more efficient search.
GRESSIVE
S
CAN
SOUND MODE
SOURCE
VOLUME
RTD250-EN Radio 5/22/03 11:12 AM Page 2