Filter
Top Products
Camera angle (DVD)
Some discs offer different camera angles for
specific scenes.
1. To change the camera angle, press the ANGLE
button on the remote or press the INFO button
twice and select the Camera angle icon with
the left/right buttons.
2. Choose the angle with the up/down arrow
buttons.
If the disc was recorded using a single camera
angle, this function is not available.
Play mode (all discs except
mp3/WMA/jpeg)
1. While the disc is playing, press the INFO button
twice for CD/VCD and three times for DVD.
2. Select the Play Mode icon using the left/right
arrow buttons.
3. Use the up/down arrow buttons to select an
option.
• DVD play modes: standard, program, A-B
repeat, title repeat, chapter repeat.
Program play mode is only available if a program
list has been created (see below).
Repeat mode is only available with discs that
display elapsed time and remaining time.
To repeat a sequence between points A and B,
choose the A-B repeat option, and then follow
the instructions for entering the two points.
• VCD and SVCD play modes: standard, program,
disc repeat, track repeat, A-B repeat.
• Audio CD play modes: standard, introscan,
random, program, repeat A-B, repeat disc,
repeat track.
4. To stop repeat playback, select the Play Mode
icon and use the up/down arrow buttons to
choose the Standard option.
Creating a Program List for Program Play
Mode (Audio CDs, DVD and VCD discs)
To use program play mode, you must first create
a program list.
1. To create a program list, press the INFO button
three times. Highlight the Play Mode option
and press the up arrow to select the Program
option.
2. Press OK. The Program screen is displayed.
3. The first spot in the list is highlighted. Use the
number buttons on the remote to enter a track
number. As for DVD discs: T stands for Title
while C stands for Chapter. As for VCD discs
and Audio CDs: T stands for Track.
4. Use the arrow buttons to move to the next
spot in the list. Enter the next track number.
5. Continue entering tracks until you have
completed your list.
6. Highlight the Play option at the bottom of the
screen and press OK or press PLAY to start
playback. The program list will play in the
order you programmed it.
To stop program play, press STOP or select
Standard from the Play Mode option in the INFO
display.
If you want to cancel the list, repeat steps 1 and 2
to select CLEAR and press OK.
12
The Info Menu
EN
Note:
• For mp3 play modes, please refer to
page 14.
RTD215 EN 6/2/07 3:36 PM Page 20