Filter
Top Products
Illustrations contained in this document are for representation only.
Connections and Setup
Fr
ont panel controls
OPEN/CLOSE - Open and close the disc tray.
SUBWOOFER - Toggle between different subwoofer output levels.
DISC SKIP – Goes to the next slot in the disc tray.
STOP - Stop disc playback.
PLAY/PAUSE - Start playing a disc. Pause.
SOURCE - Select the input source.
VOLUME - Adjusts the volume.
Surround sound light indicator - The LED lights when Surround mode is active.
ON/STANDBY - Switch the unit on and off.
USB Socket - Connects USB devices.
Connecting the Antennas
The AM and FM antennas connect to the AM and FM terminals on the system’s back panel.They
must be hooked up in order to receive clear reception.
AM Loop Antenna and FM Indoor Antenna
1. Uncoil the AM Antenna wire.
2. Press down on the Antenna tab to open the terminal
Note: Make sure the white wire on the AM lop antenna is inserted into
the upper AM LOOP terminal.
3
AM LOOP
FM 75
Ω
White
GND
EN
RTD206/207 EN 26/4/06 3:22 PM Page 5