Filter
Top Products
9
using the Tuner
POWER
STANDBY
FUNCTION
FM STEREO
BAND SELECTOR
MUTLI FUNCTION FLUORESCENT DISPLAY
PHONES
MEMORY
TUNE
TUNING
PRESET
STATION
DEMO
SUPER
BASS
DIGITAL PLL
SYNTHESIZED TUNER
V
O
L
U
M
E
C
O
N
T
R
O
L
PRESET
EQ
FM
STEREO
Your system’s tuner is very much similar to the usual ones that you’d find
in other audio systems. It too has tuning buttons, band selector for
choosing between AM and FM radio stations, FM stereo button for stereo
effects when listening to FM radio broadcast, plus a Memory button for
storing your preset radio frequencies.
Tuner operations
1. If the system is not already turned on, press POWER to turn system on.
2. Press FUNCTION repeatedly until the display shows Tuner.
3. Press BAND SELECTOR to choose your desired radio band: AM or FM.
4. For tuning to stations manually, press TUNE PRESET STATION once
or twice so the display does not show PRESET.
5. Now press either TUNING + or TUNING - to select a radio frequency.
6. When listening to FM radio stations, press FM STEREO for receiving
stereo broadcast.
Preseting stations
1. Press BAND SELECTOR to choose your desired radio band: AM or FM.
2. If the display shows PRESET, press TUNE PRESET STATION once so that
the display no longer shows PRESET.
3. Press either TUNING + or TUNING - to choose a radio frequency.
4. Press MEMORY to enter program mode, then press either TUNING + or
TUNING - to select a memory location. The display flashes PRESET, press
MEMORY within 5 seconds to set that frequency into the memory location.
5. Repeat steps 1 to 4 in this section to set up to 32 stations into memory.
Recalling Preseting stations
1. Press TUNE PRESET STATION once or twice so the display shows Preset.
2. Press either TUNING + or TUNING - to choose one of the preset stations.