RCA RS2610 Stereo System User Manual


 
Loading Discs
1. Press SOURCE repeatedly to select CD mode.
2. Press OPEN/CLOSE to open the drawer.
3. Insert up to five discs with label face up. (Press DISC
SKIP to rotate the disc carrier.)
4. Press OPEN/CLOSE to close the drawer.
Loaded disc position icon lights.
Playing Discs
• Press PLAY/PAUSE to begin or pause play,
and STOP to stop play.
• Select a specific disc by pressing DISC 1 - DISC 5.
• Press SKIP FORWARD / SKIP
BACKWARD to select a specific track.
Play and load simultaneously by:
1. Press OPEN/CLOSE to open the tray while a CD
is playing
2. Load/change discs for available trays by pressing
DISC SKIP.
3. Press OPEN/CLOSE to close the tray.
Using Preset Equalizer Curves
Press ROCK/CLASSIC, CUSTOM/FLAT, POP/JAZZ on
the main unit or EQ on the remote to toggle among
FLAT, ROCK, POP, JAZZ, CLASSIC & CUSTOM. The
display shows briefly the selection.
Creating a Custom Curve
1. Press CUSTOM/FLAT on the main unit or EQ on
the remote to select CUSTOM mode.
2. While "CUSTOM" is displayed, press SKIP FOR-
WARD / SKIP BACKWARD or
PREV/REV / NEXT/FWD on the remote to cycle
among bass and treble range
levels.
3. While BAS or TRE is dis-
played, turn the VOLUME
knob to set the associated
gain between -10 - +10.
BASS BOOST
Press BASS BOOST to turn on/off boosting the bass
frequency.
Muting Audio
Press MUTE on the remote
to cut the sound. (Remote
Only)
X- Surround
Press X-SURROUND to enjoy enriched sound quality.
This feature gives you:
1. Better width and depth for vocal and instrumental
sound.
2. More powerful presence for studio recording.
3. Enhanced surround effects with greater flexibility
in positioning speakers.
EN
BAS+08
MUTE
Sound Features
6
CD PLAYER
This unit is compatible with
CD-RW/ CD-R discs for play-
back.
Notes on CD-R/RW Disc:
Do not affix any type of labels to either side
(recordable or labeled side) of a CD-R/RW disc
as this may result in the unit malfunctioning.
To avoid damages to the CD-R/RW disc, do not
open the disc compartment door while the
disc is being read.
Do not load an unrecorded CD-R/RW disc into
the unit. This may take a longer time to read
the disc.
Playback capability for CD-RW discs may
vary due to variations in the quality of
the CD-RW disc and the recorder used to
create the disc.
CD-R / RW
RS2610-EN rev.1 7/23/02 3:11 PM Page 10