Filter
Top Products
5
EN
Display Settings
Showing the Demonstration
Not operational in CD mode. Press DEMO/DIMMER
to turn on/off demonstration mode. The demon-
stration scrolls through all display operations.
Display Clock / Timer
Setting the Clock
1. Press and hold CLOCK until the hour flashes on
the display.
2. Press SKIP FORWARD / SKIP
BACKWARD to set the hour and then
press CLOCK to shift to minute digits.
3. Press SKIP FORWARD / SKIP
BACKWARD to set the minute.
4. Press PROG./SET to save settings and STOP
to quit setting.
Note:
• When system is ON, you can press CLOCK to
display the current time for about 2 seconds.
• Clock cannot be set in FM Mode.
Setting the Timer
1. Press and hold TIMER until the ON and the hour
flash on the display ( ON - timer on time ).
2. For setting time, press SKIP FORWARD /
SKIP BACKWARD to set the hour and
then press TIMER to shift to minute digits.
3. Press SKIP FORWARD / SKIP
BACKWARD to set the minute.
4. Press TIMER to change to OF (timer off time)
with hour flashing. Repeat steps 2 & 3 for timer off
time setting.
5. Press TIMER for source selection.
6. Press SKIP FORWARD / SKIP BACK-
WARD to select between CD / TUNER /
TAPE / TUNER REC.
7. If Tuner or Tuner Rec is selected, press SKIP FOR-
WARD or SKIP BACKWARD
to select the preset station to turn on to.
8. Press TIMER to set volume.
9. Turn the VOLUME knob to set desired volume
level.
10. Press PROG./SET to save settings or STOP to
quit setting.
Activating the Timer
Press and release TIMER to turn on/off
the alarm. The alarm is active when the
clock icon indicator is lit.
Adjusting the Display Brightness
1. Press and hold
DEMO/DIMMER for
more than 2 seconds.
2. While the dimmer is dis-
played, press and release DEMO /DIMMER to select
the desired level (DIMM 0 - 3).
Sleep Mode
You can select the time interval in minutes before
the unit turn off automatically. Press SLEEP on the
remote to select among OFF, 120, 90, 60, 45, 30, 15
and 5 minutes. (Remote only)
DIMM 2
RS2610-EN rev.1 7/23/02 3:11 PM Page 9