RCA RS2130i Speaker System User Manual


 
12
EN
Record only selected tracks from a CD
1. Create a CD program by following the
instructions under “Setting Up a CD Program”
on page 14.
2. In CD stop mode, press PROG to enter
Program mode.
3. Press RECORD – NORMAL on the main unit or
RECORD on the remote control. Playback
and recording should begin automatically.
The PROGRAM and REC icons will light on
the display.
4. Recording stops automatically when the
program is finished.
Recording Tuner/AUX to USB drive
1. In Tuner mode, select the station to record
(refer to page 10 – 11 for details).
2. Press RECORD – NORMAL on the main unit or
RECORD on the remote control to start
recording.
3. Press TUNE/PRESET or RECORD – NORMAL
on the main unit or RECORD on the remote
control to stop recording.
Program Recording
Refer to ”Setting the Timer” on page 7.
Deleting Files from USB drive
1. In USB Navigation mode, select the file for
deletion using the navigation buttons (Refer to
“Advanced Navigation Controls” on page 15
for details.)
2. Press DELETE on the main unit or DEL on the
remote control.
3. Turn VOLUME CONTROL knob on the main
unit or press or on the remote control to
select Yes to delete or No to cancel.
4. Press SELECT on the main unit or press on
the remote control to confirm selection.
If Yes is selected, the display shows memory
usage information after deleting selected file.
For a few seconds, the unit will return to the
Navigation mode.
Deleting All Files
In Navigation and mp3 stop modes, press and
hold DELETE on the main unit, or press DEL on
the remote control to delete all the files on the
USB drive.
Tips:
If CD playback has already started, recording
will begin instantly when RECORD –
NORMAL or RECORD – HIGH SPEED on the
main unit or RECORD on the remote control
is pressed. If CD playback is stopped, press
RECORD – NORMAL or RECORD – HIGH
SPEED on the main unit or RECORD on the
remote control and then to start
recording. Recording will not start until CD
starts playback.
Recording stops automatically when
CD stops.
To view recording time and remaining time,
press BAND/INFO on the main unit or INFO
on the remote during recording.
The encoding bitrate for tuner, CD and AUX
signal are:
CD/Aux: 128 kbps
Tuner: 96 kbps
Elapsed
recording
time
Remaining
Time
0:22
REM 13 H
RS2130i EN 15/2/07 4:31 PM Page 21