Filter
Top Products
Loading Discs
1. Press DISC 1 /2 /3 / 4 /5 on the
main unit to open the desired disc tray.
2. Insert a disc with label face up.
3. Press the same DISC key to close the disc
tray, or press a different DISC key to open
a different disc tray directly.
4. Repeat steps 2-4 to load discs in all the
disc trays.
The occupied disc tray icons displays and the
current disc icon flashes on the display.
If the disc is a mp3/WMA CD, the respective MP3
and WMA icon will be displayed.
Play Discs
To play all discs in the disc tray
Press in stop mode to begin playback.
To play a specific disc in the disc tray
Press DISC SKIP to skip to the desired disc.
To play a specific track in the disc
Press or to select the track and press
to start playback.
Pause Discs
Press during playback to pause disc. Press
again to resume.
Play and load simultaneously
While playing one disc, you can press
OPEN/CLOSE to open or close other disc trays
to load or change disc without interrupting the
playback.
Stop Playback
During playback, press TUNE/PRESET to
stop playback.
The unit returns to Navigation mode briefly
(around 10 seconds) before entering stop mode.
EN
Sound Features
Volume Control
Turn the volume control on the main unit or press
VOL or on the remote control to adjust
volume level. The volume level shows briefly on
the display.
Bass Boost
Press B.BOOST to turn on/off boosting the bass
frequency. The BASS BOOST icon displays when
it is activated.
Muting Sound
Press on the remote to mute the sound.
When MUTE is on, the symbol flashes.
Using Preset Equalizer Curves
Press EQ to toggle among FLAT, ROCK, POP, JAZZ,
CLASSIC and CUSTOM. The display shows your
selection briefly and the relative icon lights on
the display.
Creating a Custom Curve
1. Press EQ to select CUSTOM mode.
2. While CUSTOM is displayed, press or
to cycle among displayed bass and treble
range levels.
3. While BAS and TRE is displayed, adjust volume
control to set the associated gain between
-10 - +10.
4. Press EQ to save setting and exit.
CD and mp3 Disc Playback
Tip:
• In Tuner iPod, USB or AUX mode, the
corresponding disc will start playback when
DISC 1 /2 /3 / 4 /5 is pressed.
If there is no disc in the corresponding disc
tray, the current disc will be set to the next
occupied tray.
8
RS2130i EN 15/2/07 4:31 PM Page 17