Filter
Top Products
6
Sound Features
X-BASS
Press X-BASS to turn on/off boosting the bass fre-
quency.
Volume Control
Press VOL or on the main unit or VOLUME +
or - on the remote control to adjust volume level.
Muting Audio
Press MUTE on the remote to cut the sound. (Remote
Only)
EN
CD Player
Loading Discs
1. Press SOURCE repeatedly on the main unit or one
of the disc numbers (DISC1 / DISC2 / DISC3) on
the remote control to select CD mode.
2. Press DISC1/ or DISC2/ or DISC3/
to open the corresponding disc drawer.
3. Insert up to 3 discs with label face up. (Press
DISC SKIP to change to the next disc carrier.)
4. Press the corresponding disc location on the main
unit again to close the drawer.
Loaded disc position icon lights.
Playing Discs
•Press PLAY/PAUSE to begin or pause play,
and STOP to stop playback.
Play and Load Simultaneously
1. Press DISC1/ , DISC2/ ,DISC3/ to
select and open one of the available disc trays
other then the one that is playing.
2. Press again to close the tray.
Skipping a Disc
Press DISC SKIP.
Searching Through a CD
• Press SKIP FORWARD / SKIP BACKWARD
on the main unit or TUNING or on the
remote control to skip to the next or previous
track.
•Press and hold SKIP FORWARD / SKIP
BACKWARD on the main unit or TUNING
or on the remote control to search
through a CD while it is playing.
This unit is compatible with
CD-RW/ CD-R discs for play-
back.
Notes on CD-R/RW Disc:
• Do not affix any type of labels to either side
(recordable or labeled side) of a CD-R/RW disc
as this may result in the unit malfunctioning.
• To avoid damages to the CD-R/RW disc, do not
open the disc compartment door while the
disc is being read.
• Do not load an unrecorded CD-R/RW disc into
the unit. This may take a longer time to read
the disc.
• Playback capability for CD-RW discs may
vary due to variations in the quality of
the CD-RW disc and the recorder used to
create the disc.
CD-R / RW
RS2005/07 EN rev.1 6/14/02 8:38 AM Page 10