Filter
Top Products
5
Display Settings
EN
Display
Display Clock / Timer
Setting the Clock
1. Press CLOCK twice. The hour flashes on the
display.
2. Press HOUR - or + on the main unit or PRESET
or on the remote control to set the hour and
then press CLOCK to shift to minute digits.
3. Press MINUTE - or + on the main unit or PRESET
or on the remote control to set the minute.
4. Press CLOCK to save settings.
Note:
• Press CLOCK to display the current time for about
2 seconds.
• Press and hold CLOCK to select between 12 hour
and 24 hour clock format.
Setting the Timer
1. Press and hold TIMER until the ON appear with
the hour flashing ( ON - timer on time )
2. For setting time, press HOUR - or + on the main
unit or PRESET or on the remote control
to set the hour and then press TIMER to shift to
minute digits.
3. Press press MINUTE - or + on the main unit
or PRESET or on the remote contol to set
the minute and then press TIMER to shift to move
on to source selection.
4. Press PRESET DN or UP to select source CD / Tuner
(TU) / Cassette (CA).
5. If CD is selected as the source, press PRESET DN or
UP to select disc.
If Tuner is selected as the source, press PRESET DN
or UP to select the preset station. Press TIMER to
shift to select volume.
6. Press PRESET DN or UP to select volume
level (00-32) then press TIMER to set timer
off time.
7. Repeat steps 2 and 3 to set timer off time (OF)
Press TIMER to save your settings.
Activating the Timer
Press and release TIMER to turn on/off the timer. The
timer indicator will lit.
Sleep Mode
You can select the time interval in minutes before the
unit turns off automatically. Press SLEEP to select
among SL 00, 120, 105, 90, 75, 60, 45, 30, and 15
minutes.
Note:
When LCD display shows “RESET”, Press
POWER/STANDBY to turn the unit off and on again
or unplug and plug the AC power cord again.
RS2005/07 EN rev.1 6/14/02 8:38 AM Page 9