Filter
Top Products
EN
USB Playback
Connecting USB drive to the
Main Unit
Lift the cover on the front panel. Connect
the USB drive to the main unit’s USB Jack on
the front panel.
Selecting USB Mode
Press SOURCE repeatedly to select
USB mode.
USB Playback Features
Start and Pause Playback
Press to start and pause playback.
Stop Playback
Press TUNE/PRESET to stop playback. The
unit enters the Navigation mode for 10
seconds before entering the stop mode.
Skipping Files/Fast Forwarding/Reversing
• Press or to skip to the previous or
next file.
• Press and hold or to fast forward
or reverse through a file while it
is playing.
Memory Usage
Press BAND/INFO on the main unit or INFO
on the remote control to view memory
usage on the USB drive.
Radio
Note: Mass Storage Class (MSC)
USB devices of up to 20 GB are
compatible with this unit. Do not connect
other USB devices to this unit.
Selecting Tuner Mode
Press SOURCE to enter Tuner mode.
Selecting Tuner Band
In Tuner mode, press BAND to select
between FM or AM Radio band.
Tune Mode and Preset Mode
The tuner can be in either TUNE or
PRESET mode.
• To select between TUNE and PRESET
mode, press TUNE/PRESET .
• In PRESET mode, "P: XX" will be displayed
where "XX" represents the preset
number (1-32).
Tune Mode
In TUNE mode, you can press or to
select desired frequencies.
• Press or to select frequencies.
• Press and hold or to
scan frequencies.
Preset Mode
In PRESET mode, the unit can store up to 32
radio stations in its memory. You can
program the presets in two ways:
• Manually setting the by entering every
single radio station yourself.
• Perform Auto Preset Programming and
the unit can store all available radio
stations automatically in ascending order.
Manually Setting Presets
1. Press TUNE/PRESET to enter
TUNE mode.
2. Press or to adjust the
desired frequency.
3. Press PROG once and the most recently
accessed program location flashes on
the display.
10
CD
RS2120i EN 27/3/07 11:05 AM Page 17