Filter
Top Products
Setting the Clock
1. Press and hold CLOCK on the remote
control until the hour flashes on
the display.
2. Press or to set the hour and then
press CLOCK to shift to minute digits.
3. Press or to set the minute.
4. Press CLOCK to save settings. Or press
TUNE/PRESET to cancel the setting.
Timer and Program Recording
You can turn on/off the unit or record
TUNER at preset times by setting the timer.
You can use Program Recording to preset
the unit to record your favorite radio
program. When setting the timer, choose
REC TUNER as the source to record radio at
the preset time. Ensure there is adequate
memory in the USB device connected.
Setting the Timer
1. Press and hold TIMER on the remote
control until Timer On and the clock hour
flashes on the display.
2. Set the Timer On setting. Press or
to set the hour and then press TIMER to
shift to minute digits.
3. Press or to set the minute.
4. Press TIMER to change to Timer Off
settingwith clock time flashing. Repeat
steps 2 & 3 for timer off time setting.
5. Press TIMER to select source. Press or
to select DISC/USB/iPod/REC TUNER/
TUNER. If REC TUNER is selected, press
or to select the preset station after
pressing TIMER.
6. Press TIMER to set volume. Adjust
VOLUME CONTROL to select desired
volume level.
7. Press TIMER to save settings. Press
TUNE/PRESET to cancel setting.
The timer is automatically activated once
timer setting is saved.
Activating the Timer
Press TIMER to turn on/off the alarm. The
timer icon is displayed when timer is
activated.
Sleep Mode
You can select the time interval in minutes
before the unit turns off automatically.
Press SLEEP to select among OFF, 120, 90,
60, 45, 30, 15 and 5 minutes.
The Sleep icon lights on the display when
sleep mode is activated.
View and Adjust Remaining Sleep Time
When sleep is activated, press SLEEP once to
view remaining sleep time. Press again to
change the time.
Showing Demonstration
Press DEMO/DIMMER to turn on/off
demonstration mode.
Adjusting Brightness
Press and hold DEMO/DIMMER until
"DIMMER X" displays where "X" represents
the brightness level. Press DEMO/DIMMER
to adjust the brigtness level and press any
buttons to save setting and exit.
7
EN
Display and Settings
Note: Sleep is automatically
de-activated when the unit is turned off.
Play Mode status
EQ status
Folder/audio file indication
Source indication
RS2120i EN 27/3/07 11:05 AM Page 14