RBH Sound T Series Speaker System User Manual


 
TR OU BL ES HO OT IN G
No sound from speakers.
Only the woofer or midrange/
tweeter are playing.
No sound from one speaker.
Very little bass and/or
imaging.
Speaker wire not connected.
Speaker selector on
amplier is not on.
Bi-amp clips are not intact.
Balance control on receiver
or preamp is not centered.
Speaker wire not
completely connected.
Speakers and/or subwoofers
are wired out of phase.
Make sure wire is
properly connected at both
the speaker and the amplier
observing proper polarity.
Activate proper speaker
selector on amplier.
Make certain gold bi-amp
clips are in place and
tightened down.
Place balance control in
the center.
Check all connections at
amplier and speakers.
Check entire system for
proper polarity and make
adjustments as necessary.
Situation: Probable Cause: Solutions:
C A R E & C L E A N I N G
o maintain speaker appearance, we recommend an occasional application of
furniture grade polish to the wood surface of the cabinet. To clean dust
from the grille cloth, use a vacuum with a brush attachment.
7