Filter
Top Products
he T Series is a modular speaker system designed to be used indi-
vidually or with the RBH 1010-SEN subwoofer. This combination with
the subwoofer provides for full range reproduction of the program material.
There are three basic models or congurations within the T Series:
The T-1: The T-1 is the main speaker section that reproduces the high and
midrange frequencies. The T-1 can be used by itself as a main, center or
rear speaker, or can be used as part of the next two options;
The T-2: The T-2 is a T-1 with the addition of a 1010-SEN subwoofer. The
T-1 is typically placed on top of the 1010-SEN by using the bracket system
included with this conguration.
The T-3: The T-3 is a T-2 system, with the addition of a second 1010-SEN
subwoofer. The second subwoofer is typically placed on top of the existing
T-2, but can also be placed elsewhere in the room.
In order to extract the best possible sound from your speaker system, it is
important to determine where the speakers will sound best in your listening
room.
Room reections from the oor, ceiling and side walls inuence the
balance, imaging and overall sonic quality at the listening position.
We
suggest you experiment with speaker placement to determine which location
offers the best overall sound.
For two channel listening, we recommend placing your left and right MAIN
speakers at least 15 inches from the back wall and 7 feet apart from each
other. The distance from the listening position to each speaker should be close
to the distance that separates the two main speakers. Angling the speakers
slightly inward towards the listening position may give a more spacious and
realistic sound stage.
SETUP SUGGESTIONS
3