Filter
Top Products
SETUP SUGGESTIONS CONTINUED
URROUND* speakers may be placed either behind or to the sides
of the listening position. The listening position should be at the center
of both surround speakers. For best performance you may want to experiment
with angling the surround speakers either towards or away from the listening
po-
sition.
All RBH Signature Series and Signature Inwall loudspeakers are sonically
matched with the T Series for seamless integration in a home theater setting.
In a T-2 conguration, the SUBWOOFER (1010-SEN) generally sits below the
T-1, connected by the clamping bracket (page 6). As mentioned proviously,in
a T-3 conguration, the second set of subwoofers can be mounted either
above the T-1, connected by a second set of clamping brackets, or placed
elsewhere in the room. Connection of the subwoofer is done by speaker wire,
not by audio interconnect.
When congured as a T-2P or T-3P, an RBH SA-400 is used to power the
subwoofer. The SA-400 is a monoblock subwoofer amplier. This amplier
is designed to power 1 1010-SEN at a time, which is why 2 SA-400 ampliers
complete a T-2P system and 4 SA-400 ampliers complete a T-3P system.
For proper instructions on the setup and operation of the SA-400 subwoofer
amplier, please refer to the owners manual included with the SA-400.
5
*There are several different surround formats available. Dolby Pro-Logic, Pro-Logic II, Dolby Digital and
DTS generally have a 5 speaker plus subwoofer requirement. Dolby Digital EX and DTS ES add a center
rear speaker. Please consult your audio/video professional to determine which system is best for you and
how many speakers you will require.
WARNING: Be sure to REMOVE bi-amp clips COMPLETELY when bi-amping or bi-wiring.