Filter
Top Products
8
Sometimes the vehicle
doesn’t run, but other
times it does.
Charger gets warm
during use.
Vehicle does not stop
when applying the brake.
Vehicle makes loud
noises or grinding
sounds.
Need Help? Visit our web site for replacement parts, product support, live chat and a list of
authorized service centers at www.razor.com or call toll-free at 866-467-2967 Monday - Friday
8:0
0 AM - 5:00 PM Pacific Time.
Problem Possible Cause Solution
Loose wires or connectors.
Motor or electrical switch damage.
Normal response to charger use.
Brakes are not adjusted properly.
Chain is too dry.
Check
all wires around the motors and all connectors to make sure
they are tight.
Contact your local
Razor authorized service center for diagnosis and
repair.
No action required. This is normal for some chargers and is no cause
for concern. If your charger does not get warm during use, it does not
mean that it is not working properly.
Refer to instructions on page 4 of this manual to properly adjust
brakes.
Apply a lubricant such as 3 in 1
TM
or Tri-Flow
TM
to the chain.
TROUBLESHOOTING GUIDE