Filter
Top Products
26
Follow these steps to use RDS.
1. Turn on the receiver.
2. Tune the receiver to an FM station
that transmits RDS (and CT) infor-
mation.
3. Set
TIME SET
on the right side of
the receiver to
AUTO
.
4. Make sure that your local time (as
described in “Setting and Viewing
the Local Time” on Page 16) has
been set correctly. (The receiver
compares the CT information with
your local time to display the cor-
rect time at the broadcaster’s loca-
tion).
5. If your time zone is using Daylight
Saving Time, repeatedly press
until appears.