Filter
Top Products
17
• If you enter an invalid time, the
clock beeps twice and
E
(error)
appears for about 1 second.
Repeat Steps 3–4 to enter the
correct time.
5. Press
ENTER
. The time you
set appears, and the seconds
start counting from 0.
Note:
The receiver does not dis-
play the seconds.
VIEWING A WORLD TIME
Important:
You need to set your local
time before following these steps. See
“Setting and Viewing the Local Time”
on Page 16.
1. Repeatedly press
WORLD
/
HOME
until flashes.
2. Rotate
MANUAL TUNING
until the
name of the world city (or a city in
the same time zone) appears. The
current time in that city appears
on the display.
3. To save the displayed city as your
world city, press
ENTER
.
stops flashing. Then, the
world city’s name disappears from
the display within 2 seconds.
4. To return to your home time,
repeatedly press
WORLD/HOME
until flashes. Your home
city’s name and the time in that
city appear.
5. Press
ENTER
. stops
flashing.
CHANGING A WORLD
CITY NAME
You can change the name of any of
the preprogrammed world cities to a
name you choose, then save the new
name in the receiver’s memory.
1. Repeatedly press
WORLD
/
HOME
until flashes.
2. Turn
MANUAL
TUNING
to select a
city in the same time zone as the
city you want to change.
3. Press
EDIT
. The first character of
the city’s name flashes.
4. Turn
MANUAL TUNING
to select
the desired character.
5. When the character you want
appears, press
TUNING
to
move to the next position, then
turn
MANUAL
TUNING
to enter the
next character (up to 8 charac-
ters).
Note:
If you want to correct a
character you entered, press
TUN-
ING
to move back to it.
6. Press
ENTER
. The receiver
stores the name of the world city
you entered.
WORLD
WORLD
HOME
HOME
HOME