Radio Shack DX-392 Cassette Player User Manual


 
33
driver. If you wish to protect Side B (or 2), remove the Side B (or 2) tab.
tection tab holes.
Note: Removal of the erase-protection tab does not prevent a bulk eraser from eras-
ing the tape.
Caution: When using a cassette that has had the erase-protection tabs broken off,
do not try to force down
RECORD
. Doing so might damage the recording mech-
anism.
TAPE TENSION
After you play a cassette tape several times, the tape might become tightly wound
on the reels. This can cause playback sound quality to deteriorate.
To restore the sound quality, fast-forward the tape from the beginning to the end of
one side, then completely rewind it. Then loosen the tape reels by gently tapping
each side of the cassette’s outer shell on a flat surface.
Caution: Be careful not to damage the cassette when tapping it. Do not touch the
exposed tape or allow any sharp objects near the cassette.
To record on the tape again, place a piece of strong plastic tape over the erase-pro-
20-219.fm Page 33 Wednesday, August 4, 1999 9:23 AM